Differences in compressive strength between composite resins bulk-fill with bulk-fill fiber composite resin

Ni Nyoman Nurdeviyanti; Kadek Lusi Ernawati; Ni Nyoman Intan Ayu Suadyani

Authors

Ni Nyoman Nurdeviyanti Universitas Mahasaraswati Denpasar Author
Kadek Lusi Ernawati Universitas Mahasaraswati Denpasar Author
Ni Nyoman Intan Ayu Suadyani Universitas Mahasaraswati Denpasar Author

Keywords:

Composite resin, compressive strength, bulk-fill, fiber bulk-fill

Abstract

Dental and oral health problems in Indonesia are currently quite high, one of the most common dental and oral diseases is dental caries. Teeth that have been affected by caries need special attention to be treated. Considerations in selecting the filling material also need to be taken into account so that it has the ability to withstand large chewing loads and does not fracture easily. Restoration materials that are good and can restore aesthetic function are what society needs, one of these materials is composite resin. This composite resin can be applied directly into the cavity and its color can resemble natural teeth. to determine the difference in compressive strength between bulk-fill composite resin and bulk-fill fiber composite resin. The research used was laboratory experimental with a post-test only design. This research involved 2 composite resins, namely bulkfill composite resin as group I and bulkfill fiber composite resin as group II. Samples with a cylindrical tube shape have a diameter of 4 mm and a height of 6 mm, 10 samples per group, then the samples are soaked in distilled water and then placed in an incubator at a temperature of 37⁰ for 24 hours. This was followed by each sample being tested for compressive strength using a Universal Testing Machine until it was crushed. Group I compressive strength was 223.28 Mpa and Group II was 403.9 Mpa. Data analysis used the parametric independent t-test with p = 0.00 where p < 0.05, which means the difference in compressive strength obtained was significant between bulkfill composite resin and bulkfill fiber. the compressive strength of bulkfill fiber composite resin is greater than bulkfill composite resin.

References

Abouelleil H, Pradelle N, Villat C, Attik N, Colon P, Grosgogeat B. Comparison of mechanical properties of a new fiber reinforced composite and bulk filling composites. Restor Dent Endod. 2015; 40(4): 262-70.

Allorerung, J., Anindita, P. S., & Gunawan, P. N. (2015). Uji kekerasan resin komposit aktivasi sinar dengan berbagai jarak penyinaran. e-GiGi, 3(2).

Andari, E. S., Wulandari, E., & Robin, D. M. C. (2015). Efek larutan kopi robusta terhadap kekuatan tekan resin komposit nanofiller. Stomatognatic-Jurnal Kedokteran Gigi, 11(1), 6-11.

Anidha, S., Latha, N., & Muthukkumar, M. (2019). Reinforcement of Aramid fiber with bagasse epoxy bio-degradable composite: investigations on mechanical properties and surface morphology. Journal of Materials Research and Technology, 8(3), 3198-3212.

Anusavice, K. J. (2003). Informatics systems to assess and apply clinical research on dental restorative materials. Advances in dental research, 17(1), 43-48.

Anusavice, K. J., 2004. Phillips' science of dental materials, 12 th. Elsevier Health Sciences. Elsevier Health Sciences.

Anusavice KJ, Rawls HR. Restorative resins phillips’ science of dental materials. 12th ed St. Louis; Missouri: Elsevier Science. 2007. h. 399-428.

Basri, M. H. C., Erlita, I., & Nahzi, M. Y. I. (2017). Kekasaran permukaan resin komposit nanofiller setelah perendaman alam air sungai dan air pdam. Dentino: Jurnal Kedokteran Gigi, 2(1), 101-106.

Bresciani E, Barata T, Fagunsdes T, Adachi A, Terrin M, Navarro M. Compressive and diametral tensile strength of glass ionomer cements. Journal of Applied oral Science [seial online] 2004 oct-des.

Budimulia, B., & Aryanto, M. (2018). Kebocoran mikro tumpatan resin komposit bulkfill flowable pada berbagai jarak penyinaran Microleakage of bulkfill flowable composite resin at various irradiation distances. Jurnal Kedokteran Gigi Universitas Padjadjaran, 30(1), 1-7.

Craig, R.G., Powers, J.M. 2006. Restorative Dental Material, 12 th Ed. St Louis: Mosby Year Book. p. 191 – 209 ; 65 – 66.

Craig, R.G., 2013 Restorative Dental Material, 12 th Ed. St Louis: Mosby Year Book. p. 402-423.

Dionysopoulos D, Tolidis K, Gerasimou P. Bulk Fill Composite Resins. A Novelty in Resin-Based Restorative Materials. ARC Journal of Dental Science. 2016;1(2):1-3.

Donova J.B, Garoushi S, Vallittu P.K, Lassila L.V.J. Mechanical properties, fracture resistance, and fatigue limits of short fiber reinforced dental composite resin. The Journal Of Prosthetic Dentistry, 2016. Volume 115.

EverX PosteriorTM from GC. Fiber-reinforced composite for dentin replacement in large cavities. 2013.

Fahmi, R. Z. (2018). Penerapan Alat Pembaca Sensor Load Cell Pada Universal Testing Machine (Utm) (Doctoral dissertation, InstitutTeknologiSepuluhNopember).

Ferracane, J. L. (2006). Hygroscopic and hydrolytic effects in dental polymer networks. Dental Materials, 22(3), 211-222.

Galvao , Caldas , Filho , Campos , Bagnato , Rastello , Andrade . 2013. Compressive Strength of Dental Composites Photo-activated with Different Light Tips . UK : Astro Ltd.

Garoushi S, Vallittu P.K, Lassila L.V.J. 2011. Fracture Toughness, Compressive Strength and Load-Bearing Capacity of Short 64 Glass Fiber-reinforced Composite Resin. The Chinese Journal of Dental Research. Volume 14.

Garoushi, S., Gargoum, A., Vallittu, P. K., & Lassila, L. (2018). Short fiber‐reinforced composite restorations: a review of the current literature. Journal of Investigative and Clinical Dentistry, 9(3), e12330.

Glazer B. Restoration of endodontically treated teeth with carbon fiber posts--a prospective study. J Can Dent Assoc 2000;66:613- 18.

GC corp europe. 2019. everX Posterior Instruction For Use (Online). (http://www.gceurope.com/products/everxposterior/). Diakses 22 Mei 2022.

Handayani, D. P., Puspitasari, D., & Dewi, N. (2016). Efek perendaman rebusan Daun Sirih Merah (Piper crocatum) terhadap kekerasan permukaan resin komposit. Majalah Kedokteran Gigi Indonesia, 2(2), 60-65.

Harahap, S. A., & Eriwati, Y. K. (2017). Role of Composition to Degree of Conversion of Bulk Fill Composite Resins. Jurnal Material Kedokteran Gigi, 6(1), 33-41.

Indra. A, E. Edison, H. Nofrianto (2017). Optimalisasi Tekanan Cetak Komposit Clay Brick Menuju Kualitas Strandar Nasiona Indonesia, 27-33.

Kafalia, R. F., Firdausy, M. D., & Nurhapsari, A. (2017). Pengaruh jus jeruk dan minuman berkarbonasi terhadap kekerasan permukaan resin komposit. ODONTO: Dental Journal, 4(1), 38-43.

Kementrian Kesehatan, R. I. (2019). Kesehatan Gigi Nasional. Riset Kesehatan Dasar; RISKESDAS.

Kidd EAM, Bechal SJ. 2008. Dasar-dasar karies penyakit dan penanggulangannya. Cetakan 2, Jakarta: EGC. hlm 18-24

Kristi, R. M. B., & Murdiyanto, D. (2020). Pengaruh Penambahan Serat Daun Nanas (Ananas Comosus (L.) Merr) Terhadap Kekuatan Tekan Resin Komposit Flowable. JIKG (Jurnal Ilmu Kedokteran Gigi), 3(1), 5-9.

Kumala, Y. R., Saputra, C. S., & Prasasti, A. (2020). Perbedaan kekuatan tekan resin komposit nanofiller pada perendaman obat kumur beralkohol dan non alkohol. E-Prodenta Journal of Dentistry, 4(1), 293-301.

Mackenzie L, Shortall AC, Burke FJ., 2009, Direct posterior composite: a practical guide. Dent Update. 36(2):71-80.

McCabe, John F & Walls, Angus W.G. 2008. Applied Dental Materials.9 th Edition. Hong Kong: Blackwell Publishing Ltd.

Milawati, G. A., Puspitasari, D., & Nahzi, M. Y. I. (2019). Perbandingan Nilai Kekasaran Permukaan Resin Komposit Tipe Bulk-Fill dengan Uji Thermocycling. Dentin, 1(1).

Mozartha, M., Herda, E., Soufyan, A. 2010. Pemilihan Resin Komposit dan Fiber untuk Meningkatkan Kekuatan Fleksural Fiber Reinforced Composite. Jurnal PDGI. 59 (1): 29-34.

Moezzyzade M., 2012. Evaluation of the Compressive Strength of Hybrid and Nanocomposites, Journal Dental School., 30 (1) : 24-29.

Noviyani, A., Nahzi, M. Y. I., & Puspitasari, D. (2018). Perbandingan jarak penyinaran dan ketebalan bahan terhadap kuat tarik diametral resin komposit tipe bulk fill. Dentin, 2(1).

Noort, Van Richard. 2008. Introduction to Dental Materials. 3rd Edition. Elsevier.

Notoadtmodjo,S. 2010. Metodologi Penelitian Kesehatan. Jakarta: Rineka Cipta.

O’Masta, Mark R. Mei 2014. Mechanism of Dynamic Deformation and Failure in Ultra High Molecular Weight Polyethylene Fiber-Polymer Matrix Composites. Virginia: Material Science and Engineering University of Virginia.

Panjaitan, F. E., Paramakirana, H., Santosa, P., & Rinastiti, M. (2022). Perawatan ekstrusi dan luksasi gigi molar satu mandibula dengan restorasi endocrown fiber reinforced composite Extrusion and luxation treatment of mandibular first molar with endocrown fiber-reinforced composite restoration. Jurnal Kedokteran Gigi Universitas Padjadjaran, 33(3), 28-36.

Patel P, Shah M, Agrawal N, Desai P, Tailor K, Patel K. Comparative evaluation of microleakage of class II cavities restored with different bulk fill composite restorative system: An in vitro study. J Res Adv Dent 2016; 5(2): 52-62.

Payana, D., Widiyarta, I. M., & Sucipta, M. (2018). Kekerasan Baja Karbon Sedang dengan Variasi Suhu Permukaan Material. Jurnal Mettek: Jurnal Ilmiah Nasional dalam Bidang Ilmu Teknik Mesin, 4(2), 43-48.

Permana, D. P., Sujatmiko, B., & Yulianti, R. (2016). Perbandingan tingkat kebocoran mikro resin komposit bulk-filldengan teknik penumpatan oblique incremental dan bulk. Majalah Kedokteran Gigi Indonesia, 2(3), 135-140.

Powers J, Sakaguchi R. Craig’s restorative dental materials. 13th ed New York: St. Louis Missouri: Mosby Elsevier Inc. 2012. h. 190- 199.

Pratama, F. D. (2021). Studi perilaku kekakuan kolom dengan sistem sambungan rbs balok kastela akibat beban siklik lateral (Doctoral dissertation, Universitas Hasanuddin).

Prasetya, J. A. (2018). Sistem Human Machine Interface Pada Universal Testing Machine (Doctoral dissertation, Institut Teknologi Sepuluh Nopember).

Purnamasari, F. L., Sari, W. P., & Elianora, D. (2019). Uji kekerasan fiber reinforced composite dengan e-glass fiber dental dan non-dental Hardness test of dental and non-dental e-glass fiber reinforced composite. Jurnal Kedokteran Gigi Universitas Padjadjaran, 31(1), 60-64.

Ratih, D. N., & Novitasari, A. (2017). Kekerasan mikro resin komposit packable dan bulkfill dengan kedalaman kavitas berbeda. Majalah Kedokteran Gigi Indonesia, 3(2), 76-82.

Ritter, A.V., Boushell, L.W., Walter, R., 2019. Sturdevant’s Art and Science of Operative Dentistry 7 th ed. St. Louis : Elsevier; Chapter 6.

Rosenstiel, S. F., Land, M. F., & Walter, R. (Eds.). (2022). Contemporary fixed prosthodontics. Elsevier Health Sciences.

Rosyida, Niswati F., Siti Sunarintyas, dan Pinandi Sri P., 2015, The Effect of Silanated and Impregnated Fiber On the Tensile Strength of E-Glass Fiber Reinforced Composite Retainer, 48(1):22-25

Sakaguchi, R.L., Power, J.M., 2012. Craig’s restorative dental materials 13 thed. Philadelphia: Elsevier, 161-81.

Saputra, C. S. (2019). Perbedaan Kekuatan Tekan Resin Komposit Nanofiller Pada Perendaman Obat Kumur Beralkohol Dan Non Alkohol (Doctoral dissertation, Universitas Brawijaya).

Samura, L. (2017). Pengujian Compressive Strength Dan Thickening Time Pada Semen Pemboran Kelas G Dengan Penambahan Additif Retader. PETRO: Jurnal Ilmiah Teknik Perminyakan, 6(2), 49-54.

Sidiqa, A. N., & Soerachman, B. (2017). Pengaruh Penyinaran Qth Dan Led Pada Kekuatan Tekan Resin Komposit Bulkfilldengan Berbagai Ketebalan. Jurnal Material Kedokteran Gigi, 6(1), 7-13.

Sofiani, E., & Rovi, F. (2020). Pengaruh Lama Penyinaran dan Ketebalan Resin Komposit Bulk Fill Terhadap Kebocoran Mikro. Insisiva Dental Journal: Majalah Kedokteran Gigi Insisiva, 9(2), 72-81.

Soratur SH. 2002. Essentials of Dental Materials. Jaypee Brothers Medical Publishers: New Delhi.

Sepideh., (2008). Comparison of shear bond strength of amalgam bonded to primary and permanent dentin. Journal of Indian Society of Pedodontics and Preventive Dentistry, 26(2), 71.

Sun, G., & Margaretta, D. L. (2019). Pengaruh Obat Kumur Mengandung Alkohol 9% Dan Non-Alkohol Terhadap Kekuatan Tekan Resin Komposit Bulk-Fill (Penelitian). Jurnal Kedokteran Gigi Terpadu, 1(2).

Sundari, I., Sofya, P. A., & Hanifa, M. (2016). Studi kekuatan fleksural antara resin akrilik heat cured Dantermoplastik nilon setelah direndam dalam minuman kopi Uleekareng (Coffea robusta). Journal of Syiah Kuala Dentistry Society, 1(1), 51-58.

Tekçe, N., Aydemir, S., Demirci, M., Tuncer, S., Sancak, E. İ., & Baydemir, C. (2020). Clinical performance of direct posterior composite restorations with and without short glass-fiber-reinforced composite in endodontically treated teeth: 3-year results. J Adhes Dent, 22(2), 127-137.

Todd J-C, Volkel T. Bluephase Style Scientific Documentation. 2015:1-33.

Van Ende, Mine A, Merbeek Van. 2012. Bonding of low-shrinking composites in high C-factor cavities.

Vidyanara, I. R., Giri, P. R. K., & Kusumadewi, S. (2021). Perbedaan kebocoran mikro antara resin komposit fiber dan non fiber pada kavitas kelas I. Bali Dental Journal, 5(1), 46-50.

Wang RM, Zheng SR, Zheng YG. Polymer Matrix Composite and Tecnology.Amsterdam: Elsevier Science; 2011. h. 33-44

Widyastuti, N. H., & Fahrini, N. (2021). Effect of E-Glass Fiber on Nanofiller Composite Resin Compressive Strength. Proceeding of The URECOL, 235-241.

Zhang, C., Zheng, D., Song, G. L., Guo, Y., Liu, M., & Kia, H. (2018). Effect of the microstructure of carbon fiber reinforced polymer on electrochemical behavior. Journal of the Electrochemical Society, 165(10), C647.